Rémi KokabiNovember 27, 20257 min readLast update: Sep 24, 2026
IMAP vs SMTP: The 2 Email Protocols You're Probably Mixing Up (Plus POP3)
Every outbound email you send touches at least two protocols before it reaches the recipient. I’ve watched sales teams troubleshoot bounced campaigns for hours because someone entered port 25 instead of 587. One wrong number, and your entire sequence lands nowhere.
In this post, I’ll break down what IMAP and SMTP actually do, how they work together, where POP3 fits, and which ports and security settings matter when you’re setting up email for outreach. I’ll also show you where these protocols connect to real cold-email workflows.
Quick comparison: IMAP vs SMTP vs POP3
SMTP | IMAP | POP3 | |
|---|---|---|---|
Purpose | Send and relay email | Access and sync email | Download email |
Direction | Outgoing | Incoming | Incoming |
Storage | No local storage (hands off to receiving server) | Keeps messages on server, syncs across devices | Downloads to one device, deletes from server by default |
Ports used by IMAP, SMTP, and POP3
Port numbers are pre-assigned by the Internet Assigned Numbers Authority (IANA). Here are the ones you need to know for email:
Protocol | Default port (unencrypted) | Secure port (SSL/TLS) |
|---|---|---|
SMTP | 25 (server-to-server relay) | 587 (STARTTLS, IANA-registered for submission), 465 (implicit SSL) |
IMAP | 143 | 993 (TLS/SSL) |
POP3 | 110 (unencrypted) | 995 (TLS/SSL) |
What is IMAP?
IMAP stands for Internet Message Access Protocol. (The full spec is defined in RFC 3501 by the IETF, now superseded by RFC 9051 for IMAP4rev2.)
IMAP allows a client to access and manipulate electronic mail messages on a server. In plain English: IMAP synchronizes the emails on its server with those in your email account. Any changes you make on one device (reading, deleting, archiving) are reflected across all devices connected to that account.
That two-way sync is what makes IMAP the default for sales teams managing replies across multiple mailboxes. If a rep reads a reply on their phone, it shows as read in the desktop client too. No duplicates, no confusion.
When you connect your inbox to an outreach platform, the platform uses IMAP to pull replies in real time.
What is SMTP?
SMTP stands for Simple Mail Transfer Protocol. It’s defined in RFC 5321.
SMTP is behind the message transfer from server to server, or mail client to server. While IMAP handles receiving, SMTP handles sending. When you hit “send,” SMTP takes your outgoing email from your client to the sending server, then relays it to the recipient’s receiving server.
There’s a distinction worth knowing: port 25 was the standard for outgoing emails, but it’s typically used now for server-to-server communication. Port 587 has largely replaced port 25 for client-server email sending and is generally secured using TLS. Most residential ISPs block port 25 entirely.
Why SMTP configuration matters for cold outreach
If you’re sending cold emails, SMTP misconfiguration is one of the fastest ways to land in spam. Wrong port, missing SPF record, no DKIM signature: any of these silently tanks your deliverability.
This is why warming up a sending domain before launching campaigns matters so much. Tools like lemwarm gradually build your sender reputation by sending and receiving real emails on your behalf, so your SMTP setup is trusted by receiving servers before your first cold sequence goes out.
Pair that with verified email data to keep your bounce rate low, and your SMTP sender score stays healthy.
How SMTP and IMAP work together
Here’s the real workflow, not just the analogy.
You write an email and hit send. Your email client passes the message to an SMTP server.
The SMTP server looks up the recipient’s mail server (via MX records) and relays the message.
The message lands in the recipient’s mailbox on their mail server.
The recipient’s email client connects via IMAP and syncs the new message to their inbox, on every device.
For outbound sales, this loop is the backbone of every campaign. Your outreach tool sends emails through SMTP. When a prospect replies, that reply syncs via IMAP back into your tool’s inbox.
This is exactly how lemlist’s unified inbox works. You run multichannel outbound campaigns, sending via SMTP through your connected accounts, and every reply syncs via IMAP into one place. No toggling between Gmail tabs. No missed replies.
For teams running multiple sending accounts (which you should be, to spread volume), IMAP sync across all of them keeps your pipeline visible in a single view.
POP3: the 3rd protocol
POP3 stands for Post Office Protocol (version 3), defined in RFC 1939.
POP3 retrieves a message from the server to a single device and, by default, deletes the message from the server afterward.
To summarize: POP3 is retrieve and delete. IMAP is retrieve and synchronize.
POP3 pros:
Works offline after download. Good for low-bandwidth setups.
Simple protocol with minimal server-side storage.
POP3 cons:
No multi-device sync. If you download on your laptop, your phone won’t see that email.
Deleting from the server means no backup unless you configure the client to leave copies.
Most modern email providers default to IMAP for multi-device sync. If your team shares inboxes or manages replies across devices, POP3 creates blind spots. Stick with IMAP.
IMAP vs SMTP: what’s the difference?
SMTP and IMAP handle opposite sides of the email exchange. SMTP is the outgoing protocol, responsible for sending and relaying messages between servers. IMAP is incoming, responsible for retrieving and synchronizing messages from the server to your client.
You need both. SMTP without IMAP means you can send but never see replies. IMAP without SMTP means you can read messages but never send them.
In an outreach context, your sending tool connects via SMTP to dispatch emails and via IMAP to track replies. That’s why both protocols matter for your cold email templates to actually generate conversations, not just sends.
IMAP vs POP3: what’s the difference?
Both IMAP and POP3 are incoming mail protocols. The difference is what happens after retrieval.
IMAP is designed to keep messages on the server and sync state (read or unread) across every connected client, unlike POP3’s typical download-and-delete behavior.
For solo users with a single device and offline needs, POP3 still works. For sales teams with shared mailboxes and multi-device workflows, IMAP is the only real option.
Securing your email connections: SSL, TLS, and STARTTLS
Every port table above has a “secure” column. Here’s what those terms mean in practice.
SSL (Secure Sockets Layer): The original encryption protocol for email. Connections on ports 465 (SMTP), 993 (IMAP), and 995 (POP3) use implicit SSL, meaning the connection is encrypted from the very first byte.
TLS (Transport Layer Security): The successor to SSL. In practice, when someone says “SSL” today they usually mean TLS. Port 587 uses the STARTTLS command to upgrade a plain text connection to an encrypted one.
STARTTLS: Not a protocol itself. It’s a command that upgrades an existing unencrypted connection to TLS. The client and server first negotiate a secure connection, and only once the communication channel is secured are the logins sent to the server. The login fails if no secure channel can be set up.
The takeaway: always use encrypted ports. For a secure setup, use SMTP port 587 to send and IMAP port 993 or POP3 port 995 to receive. The plain-text ports (25, 110, and 143) should be used only when you have a specific reason.
When you warm up your sending domain through lemlist, the platform handles TLS connections automatically. One less thing to misconfigure.
For developers who want programmatic control over email connections and campaign management, check the lemlist API documentation.
Final thoughts
Email protocols sound complicated until you see what each one does. SMTP sends. IMAP syncs. POP3 downloads. Encrypted ports keep everything secure in transit.
If you’re running cold outreach, the protocol layer matters more than most reps realize. Wrong SMTP settings tank deliverability. Missing IMAP connections mean missed replies. And skipping warmup means your freshly configured SMTP domain starts with zero reputation.
lemlist ties all of this together: SMTP sending across multiple accounts, IMAP reply sync in a unified inbox, and automated warmup through lemwarm. Used by 20,000+ sales teams and rated 4.6/5 on G2.
If you want to see how it works with your own mailboxes, start a 14-day free trial.
Find your next outbound tool
Discover a better way to find leads and run multichannel campaigns with lemlist.