Rémi KokabiNovember 17, 20268 min read

Why your sales calls show up as spam likely and how to fix it

Your prospect’s phone rings. They glance down, see “Spam Likely,” and let it go to voicemail. You did nothing wrong on the call itself. The carrier flagged your number before the conversation ever had a chance to start.

Spam likely calls happen because of patterns, not intent. Carriers watch how a number behaves (how often it dials, how short the calls run, how many go unanswered) and score it accordingly. A clean sales rep dialing all day can trigger the same red flags as a robocaller.

In this piece, I’ll walk through what the “Spam Likely” label actually means, why sales numbers get caught in it, and how to check if yours are already flagged. Then I’ll cover how to fix a flagged number and how to keep your numbers healthy so you stop losing connect rate to a problem you can prevent.

What spam likely means

“Spam Likely” is a label that the recipient’s carrier or a third-party app attaches to an incoming call when its analytics flag the number as probably unwanted. The label can come from the carrier’s own system (T-Mobile Scam Shield, AT&T Active Armor, Verizon Call Filter) or from a third-party app like Hiya, YouMail, RoboKiller, or Truecaller.

The label is applied at the network level, before the call ever reaches the prospect’s phone. That means the prospect sees “Spam Likely” or “Scam Likely” on their screen before they decide whether to pick up, and most don’t.

Behind the label sits a call authentication framework called STIR/SHAKEN. The FCC requires all voice service providers to implement STIR/SHAKEN in their IP voice networks, and it works like this: when a call originates, the carrier digitally signs the caller ID as legitimate, and the receiving carrier validates that signature before the call reaches the consumer.

The system uses a three-level grading scale to describe how much trust the originating carrier has in the caller’s right to use that number, with attestation levels ranging from A to C.

  • A (full attestation): the provider recognizes the entire phone number as being registered with the originating subscriber

  • B (partial attestation): the call originated with a known customer but the entire number cannot be verified

  • C (gateway attestation): the call can only be verified as coming from a known gateway

While A-level attestation provides the highest trust and best deliverability, even A-level calls aren’t guaranteed to avoid spam filters. Terminating carriers combine attestation with their own analytics, so authentication alone does not prevent a spam label. Your calling behavior matters too.

Why sales numbers get flagged

Carrier algorithms label calls as spam based on calling behavior, not intent. A legitimate SDR dialing prospects all day can trigger the same patterns that robocallers do.

The most common triggers:

  • Making too many calls in a short time from a single number raises red flags with carriers, and the higher the volume, the more likely the number is to be flagged.

  • Numbers that repeatedly make short calls, have low connection rates, or drop calls are more likely to be flagged by spam detection systems.

  • Consumers can report numbers they believe to be spam directly to their carrier, and once reported, the number may be flagged as “Spam Likely” to protect other users.

  • Brand new phone numbers with no history are an immediate red flag, as spammers use many phone numbers to evade analytics.

There is no single spam list. Each carrier uses its own analytics partner and label, so a number can be clean on one network and flagged on another. That makes the problem harder to spot because a rep might connect fine on one carrier while every T-Mobile prospect sees “Scam Likely.”

Calling unverified or scraped lists makes this worse. When a large share of dials go to disconnected or wrong numbers, the carrier sees a pattern of failed connections that looks like a robocaller cycling through random digits.

How to check if your numbers are flagged

The simplest check: call your own outbound number from phones on different carriers. Call your own number from a friend’s phone and see what displays. Test on T-Mobile, AT&T, and Verizon separately because each carrier scores independently.

Beyond the manual test, you can check your number’s status through the analytics engines that power carrier labels:

  • Free Caller Registry is a platform allowing businesses to register their phone numbers with major U.S. carriers to ensure accurate caller ID information and reduce the chances of being flagged as spam.

  • Hiya Number Registration is a free service for businesses of any size to register their phone numbers with carriers. It also shows your current spam status.

  • First Orion (powers T-Mobile’s Scam Shield) and TNS (powers Verizon’s Call Filter) each maintain their own lookup portals.

Inside lemlist, the number health score monitors your outbound numbers and flags reputation issues before they tank your connect rate. Instead of checking each carrier manually, you see the status of every number in one place.

How to fix a flagged number

Once a number is flagged, the fix is a combination of registration, rest, and behavior change.

Register your numbers. Free Caller Registry submits your numbers to all major US wireless and wireline carriers through one form, via First Orion, Hiya, and TNS. It’s free and takes about 5 minutes. Registration tells carriers your number belongs to a real business. It does not guarantee the label disappears, but it gives the analytics engines verified identity data to weigh against the behavioral signals.

Rest the flagged number. Stop dialing from a number that is actively labeled. Continuing to push volume through a flagged number generates more short calls and more rejections, which confirms the carrier’s suspicion. Pull the number out of rotation for a period and let the negative signals decay.

Lower volume per number. When you bring a number back (or start a new one), spread your dials across multiple numbers instead of burning through one. The goal is to keep each number’s daily call count low enough that it looks like a normal business line, not a dialer.

Use local presence numbers. Prospects are more likely to answer a local area code, and carriers treat calls to a local area more favorably than a single number blasting across every region.

How to keep numbers healthy

Fixing a flagged number is reactive. Keeping numbers healthy in the first place saves you from losing days of dials.

lemlist’s number health score tracks the reputation of every outbound number and triggers automatic rotation when a number’s score drops. Instead of a rep dialing from one number and discovering the flag a week later, the system shifts calls to a clean number before the damage is done.

Healthy numbers start with clean data. lemlist’s database covers 650M+ contacts with phone numbers found for around 77% of contacts through waterfall enrichment across 14+ providers. Verified numbers connect at roughly double the rate of scraped lists (around 20% vs. around 10%, per lemlist internal data). Fewer wrong numbers means fewer failed connections, which means fewer signals that trigger carrier flags.

A parallel dialer calling up to 5 prospects at once can cover more ground with fewer numbers, but only if the underlying data is clean. Pairing a dialer with bad data accelerates the flagging problem instead of solving it.

Voicemail detection also helps. lemlist detects answering machines so reps only get connected to people. That cuts the number of ultra-short “calls” (the ones where a voicemail picks up and the rep hangs up in two seconds) that carriers interpret as spam behavior.

What it does to your connect rate

A flagged number does not gradually lose performance. It drops off a cliff. When prospects see “Spam Likely” on their screen, most reject or ignore the call entirely.

The gap between teams that manage number health and those that don’t shows up clearly in cold calling statistics. Per lemlist internal data, the connect rate distribution across campaigns looks like this:

Segment

Connect rate

Bottom 25% of campaigns

1.07%

Median campaign

9.1%

Average across all campaigns

13.8%

Top 10% of campaigns

34.1%+

A team stuck at 1.07% is dialing roughly 9 to 10 times more than a median team to get the same number of conversations. That gap is a systems problem: flagged numbers, unverified data, and no rotation.

The same data shows that verified numbers connect at around 20%, while scraped lists sit around 10%. And 48% of reps make only a single attempt per prospect, even though reaching 5+ attempts pushes the share of prospects reached from 9.9% to 31.2% (lemlist internal data). Flagged numbers make every one of those attempts less likely to land, compounding the loss.

Reach prospects everywhere

Combine email, LinkedIn, and calls to book more meetings.

Frequently asked questions

Carrier algorithms label calls as spam based on calling behavior, not intent. High call volume from a single number, short call durations, low answer rates, and consumer complaints all contribute. Calls signed with full attestation (A-level) are less likely to be flagged, while calls without attestation are far more likely to be marked Spam Likely.

Register your number with the Free Caller Registry and directly with the carrier analytics engines (Hiya, First Orion, TNS). Then rest the number, stop dialing from it for a period, and reduce the per-number volume when you bring it back. Registration alone does not remove the label if the calling behavior that caused it continues.

Carriers do not publish a specific threshold. The flag is based on a combination of signals: volume, answer rate, call duration, and complaints. A number making 50 calls a day with high answer rates and long conversations is treated differently from one making 50 calls a day where nobody picks up. Focus on keeping the ratio of connected, meaningful calls high rather than targeting a magic number.

Yes, but only when paired with clean data and reasonable volume per number. Rotating through numbers spreads the load so no single number accumulates enough negative signals to get flagged. lemlist’s number health score handles this automatically, rotating numbers before they hit a reputation threshold. Rotation without fixing the underlying data quality or call patterns will flag the new numbers too.
Rémi Kokabi

Rémi Kokabi

Co-founder @GTM Club

Share this post