Rémi KokabiNovember 17, 20268 min read

Voicemail drop for sales calls, when to use it and what to record

Your dialer hits voicemail on nine out of ten calls, and most reps hang up and move on without leaving a word. That silence is a wasted touchpoint. A voicemail drop fixes it: one click plays your pre-recorded message, the dialer moves to the next number, and the prospect gets a reason to check the email you already sent.

This article breaks down when a voicemail drop earns its place in a sequence, how many to leave before you start sounding desperate, and what to actually say in the twenty seconds you get before someone deletes it. You will also see how to pair the voicemail with an email or LinkedIn touch so the call step does more than fill dead air, and how to set the whole thing up inside lemlist.

What voicemail drop is

A voicemail drop is a dialer feature that lets you leave a pre-recorded message in a prospect’s voicemail with one click, instead of repeating the same pitch on every unanswered call. The dialer detects the answering machine, plays your recording, and moves you to the next number while the message finishes.

A dialer-side drop plays a pre-recorded message into a mailbox after a call that already rang, saving the rep the repetition. That is the version built into sales dialers and the one this article covers.

You will sometimes see the term used for ringless voicemail, which is a different technology. A standard voicemail drop is a normal call that rings until voicemail answers. Ringless voicemail skips the ring and delivers the recording straight to the voicemail box via a server, so no call ever reaches the handset.

The distinction matters for compliance. Ringless voicemail deposits a prerecorded message into voicemail without ringing the phone. In November 2022 the FCC ruled it is a call under the TCPA, requiring consent and carrying statutory damages of $500 to $1,500 per message. Standard voicemail drop on a normally dialed call is a productivity feature. Ringless voicemail is a regulated robocall.

For outbound sales, stick with dialer-side voicemail drop. The call rings, the prospect can pick up, and if they don’t, you drop a pre-recorded voicemail and keep dialing.

When a voicemail drop is worth it

A voicemail drop earns its place on the second or third attempt, not the first. By that point the prospect may have seen your name in an email or on caller ID, and a short voicemail gives them a reason to look at the message you sent.

The data backs this up. A single attempt reaches only 9.9% of prospects, while two attempts reach 17.8% and three reach 24.5% (lemlist internal data). Yet 48% of reps make a single attempt. A voicemail on attempt two or three keeps you in the game while most competitors have already moved on.

Voicemail drops work best when:

  • The prospect has already received an email from you (the voicemail points them back to it)

  • You are calling a warm lead who visited your site, replied to a previous campaign, or was referred

  • You have a specific reason to call, like a trigger event or a recent funding round

If you have no prior touchpoint and no context, a voicemail on a cold first dial adds noise without signal. Save the drop for when your name means something.

How many voicemails to leave in a sequence

One or two across the entire sequence. Never on every attempt.

If you want to understand how many times to call a prospect before moving on, the short answer is five or more attempts are needed to reach 31.2% of prospects (lemlist internal data). But that does not mean five voicemails. Leaving a message on every missed call trains the prospect to ignore you.

A practical structure looks like this:

Attempt

Action

1

Call, no voicemail

2

Call, drop voicemail, send a follow-up email the same day

3

Call, no voicemail

4

Call, drop a second (shorter) voicemail if no engagement yet

5+

Call only, vary the time of day

Two voicemails give you two chances to be heard without becoming the rep who fills up their inbox.

How to record a voicemail that gets a callback

Keep it under 20 seconds. The prospect will decide in the first five whether to keep listening or delete.

Open with your name and company, then state the reason you called in one sentence. Tie it to something relevant to them, not to your product. End with a single ask, and mention the email you are about to send so they have a second way to respond.

A few recording principles that hold up:

  • Speak at a natural pace, slightly slower than a live conversation

  • Say your phone number at the end, slowly, and repeat it

  • Record in a quiet room with no echo

  • Smile while you record (it changes the tone of your voice more than you think)

For full scripts you can record today, read the cold call voicemail script guide. It covers first-touch and follow-up messages with word-for-word examples.

One recording is not enough. Record two or three versions so you can rotate them across your sequence. A prospect who hears the exact same audio twice will tune out faster than one who hears a slightly different angle each time.

Pair the voicemail with an email or LinkedIn step

A voicemail alone is easy to forget. Pair it with an email sent the same day, ideally within an hour. The voicemail creates name recognition, and the email gives the prospect something to act on without having to call you back.

This combination works because calls and emails reinforce each other. Sequences that include a call step produce an interested rate of 4.62% per lead in the US, compared to 2.4% for sequences without one. In France the gap is wider: 9.53% versus 2.04%. Outside those markets, it is 4.86% versus 1.84% (lemlist internal data).

There is also a diminishing-returns angle. After three emails with no reply, a call step generates a 1.9% reply rate while a fourth email manages only 0.8% (lemlist internal data). The voicemail drop is what makes that call step efficient: instead of spending 30 seconds on every answering machine, you drop the message and move to the next dial.

A good day-of pairing looks like this:

  • Call the prospect in the morning, drop voicemail if no answer

  • Within the hour, send a short email referencing the call (“Left you a quick voicemail about…”)

  • The next day, visit their LinkedIn profile or send a connection request

The voicemail primes them, the email gives them a low-friction way to reply, and the LinkedIn touch adds a face to the name.

Set up voicemail drop in lemlist

lemlist includes one-click voicemail drop in both its Power Dialer ($50 per seat per month) and Parallel Dialer ($150 per seat per month). Both are add-ons available on the Multichannel and Enterprise plans.

Here is how it works in practice. You build a multichannel sequence with email, LinkedIn, and call steps. When the sequence reaches a call step, the dialer pulls up the prospect with their full context (previous emails, LinkedIn activity, notes). You dial, and if the call goes to voicemail, lemlist’s answering machine detection identifies it so you only get connected to live answers. When you do hit a machine, one click drops your pre-recorded message and the dialer moves to the next prospect.

With the Parallel Dialer, up to five prospects are called at the same time, and you are connected to the first person who picks up. The rest go to voicemail, where you can drop your recording.

Because calls run inside multichannel sequences, the voicemail is not an isolated touchpoint. It sits between the email that came before and the LinkedIn step that follows, all visible in one timeline. Call recordings, transcripts, and AI summaries sync to your CRM (HubSpot, Salesforce), so nothing gets lost.

A Multichannel plan starts at $87 per user per month (annual billing). Add the Power Dialer and the total is about $137 per seat per month. Add the Parallel Dialer instead and it is about $237. The advantage is that you get the data provider, the sequencer, and the dialer in one platform instead of stitching three tools together. Prices checked November 2026.

One honest note: lemlist is an outbound platform, not a dedicated dialer company. The Parallel Dialer tops out at five simultaneous lines (some competitors go to ten), and the dialers are paid add-ons on top of the Multichannel plan. The Parallel Dialer is new (November 2026), so it does not have years of reviews behind it yet. If your team needs ten or more parallel lines and nothing else, a standalone dialer may be a better fit. For teams that want calling inside a full multichannel workflow, the integration is the point.

Reach prospects everywhere

Combine email, LinkedIn, and calls to book more meetings.

Frequently asked questions

Voicemail drop on a normally dialed outbound call is a productivity feature, not a separate legal category, and is widely used by sales teams. It follows the same rules as any outbound sales call. Ringless voicemail is different: the FCC declared that ringless voicemails are calls subject to the requirements of the Telephone Consumer Protection Act (TCPA). If you use a standard dialer that rings the phone before dropping a message, you are making a normal call. Always respect Do Not Call lists and local regulations. This is not legal advice.

Under 20 seconds. Lead with your name and the reason you called, end with one ask and your number. Anything over 30 seconds gets deleted before the prospect hears the point.

In most cases, no. The first attempt is better used to test whether the prospect picks up. Save the voicemail for the second or third attempt, after they have seen your name in an email. That way the voicemail reinforces a touchpoint instead of arriving cold.

Yes. In a parallel dialer, multiple lines ring at once and you connect to the first live answer. The remaining calls that hit voicemail can receive your pre-recorded drop. In lemlist, the Parallel Dialer includes the same one-click voicemail drop as the Power Dialer.

Rémi Kokabi

Rémi Kokabi

Co-founder @GTM Club

Share this post