Rémi KokabiNovember 19, 20268 min read

Holiday follow-up emails: 8 templates for before and after the break

Send your last follow-ups on open conversations before mid-December. Pause all cold outreach over the holiday weeks. Restart with a short follow-up in the first full working week of January.

Most reps either go silent for a month or keep blasting cold sequences straight through the break. Both choices cost you pipeline. A good holiday follow up email respects the calendar and still moves the deal forward.

Below I give you eight templates for before and after the break, plus the exact timing to send each one. You’ll also see what to avoid (season’s greetings blasts, discount pressure, guilt-trip lines) and how to automate the pause and restart in lemlist without sounding like a bot. By the end, you’ll know exactly what to send, when, and why it still gets replies in January.

When to send holiday follow-ups

Timing matters more than the message during the holidays. Most decision-makers start checking out mentally around December 20 and do not fully re-engage until the second or third working day of January.

Period

What to send

Early December

Last follow-ups on open conversations, propose January dates

Mid-December

Short “before the break” emails to warm contacts only

Holiday weeks (Dec 24 to Jan 1)

Nothing cold. Answer replies only

First full week of January

Follow-ups on “after the holidays” replies

If a conversation is already active, early December is the window to lock down next steps. If the prospect has gone quiet, mid-December is too late to restart. Wait for January.

Before the break

These three templates are for prospects you have already spoken with or emailed. Each one has a clear next step tied to January so the conversation survives the break.

1. Lock a January meeting

Subject line: Picking up in January

Hi {{firstName}},

I know December gets packed. Rather than trying to squeeze something in now, want to lock a time in the first or second week of January?

Here are a few slots: {{slot1}}, {{slot2}}, {{slot3}}.

If none of those work, send me a day that does and I will build around it.

Talk soon,
{{senderName}}

When to use it: A prospect showed interest but you have not booked a call yet. Send in the first two weeks of December.

What to personalize: The proposed dates, and a one-line reference to the topic you discussed. If you need a framework for structuring meeting request emails, start there.


2. Close the loop on an open proposal

Subject line: Quick note on the proposal

Hi {{firstName}},

Wanted to check in on the proposal I sent on {{dateSent}}. I know budgets and priorities shift at year-end, so no pressure to decide this week.

If this is still on the table for Q1, let me know and I will hold the pricing through January. If priorities changed, that is fine too.

Either way, a one-line reply helps me plan.

{{senderName}}

When to use it: You sent a proposal or pricing in November or early December and have not heard back. Send before December 15.

What to personalize: The date you sent the proposal and the specific deliverable or pricing detail. Tying it to Q1 pipeline planning gives the prospect a reason to respond now.


3. Short end-of-year check-in with a warm contact

Subject line: Before the year wraps up

Hi {{firstName}},

Quick note before things wind down. I appreciated the conversation we had about {{topic}} and wanted to keep the door open for Q1.

No ask here. If anything changes on your end in January, I am easy to reach.

Have a good break,
{{senderName}}

When to use it: A warm contact you have built a relationship with but who is not in an active deal cycle. Send in the second week of December.

What to personalize: Reference a specific conversation, project, or challenge they mentioned. Keep it to one sentence. This is a relationship touch, not a pitch.

During the break

4. Reply to an out-of-office message

Do not reply to the auto-reply itself. That email goes nowhere useful and makes you look like a bot. Instead, note the return date from the out-of-office and schedule your follow-up for one to two days after that date.

Subject line: Following up, {{firstName}}

Hi {{firstName}},

I reached out on {{originalDate}} about {{topic}}. Looks like you were out until {{returnDate}}, so circling back now.

Here is the short version: {{oneSentenceSummary}}.

Worth a conversation? Happy to work around your schedule this week.

{{senderName}}

When to use it: You emailed during the holidays and received an out-of-office auto-reply. Schedule this to send one to two business days after their stated return date.

What to personalize: The original email date, the return date from the OOO, and a one-sentence summary of your original message. Do not copy-paste your first email. Compress it.

After the break

January is where the real opportunity sits. Prospects who said “reach out after the holidays” gave you permission. Prospects who went quiet in December may have been busy, not disinterested. And meetings booked before the break need confirmation because calendars shift over the holidays.

5. “You said to reach out in January”

Subject line: January, as promised

Hi {{firstName}},

When we last spoke in December, you mentioned January would be a better time to revisit {{topic}}. Taking you up on that.

Would {{day1}} or {{day2}} work for a 20-minute call?

{{senderName}}

When to use it: The prospect explicitly told you to follow up after the holidays. Send in the first full working week of January.

What to personalize: Reference the exact topic from your December conversation and propose two specific days. The anchor here is their own words, which makes this the highest-converting follow-up of the bunch.


6. Restart a conversation that went quiet in December

Subject line: Picking this back up

Hi {{firstName}},

We were going back and forth in December about {{topic}}, and then the holidays happened. Totally understand.

Still relevant on your end? If so, I have a couple of ideas on how to move forward. If not, no worries at all.

{{senderName}}

When to use it: A prospect engaged in November or December (replied, opened multiple times, clicked) but stopped responding. Send in the first or second week of January.

What to personalize: The specific topic or pain point from your earlier exchange. One sentence of context is enough. Do not re-pitch from scratch.


7. Confirm a meeting booked before the holidays

Subject line: Still on for {{meetingDate}}?

Hi {{firstName}},

We booked a call for {{meetingDate}} back in December. Wanted to confirm that still works on your end.

If the time shifted, send me a couple of alternatives and I will adjust.

Looking forward to it,
{{senderName}}

When to use it: You booked a meeting in December that falls in the first two weeks of January. Send this two business days before the meeting.

What to personalize: The meeting date and time. If you discussed a specific agenda item, add one line to remind them what you will cover.


8. Last try before closing the file

Subject line: Should I close this out?

Hi {{firstName}},

I have followed up a few times about {{topic}} and have not heard back. Completely understand if the timing is off or priorities shifted.

If this is not relevant right now, I will close out my notes on this. No hard feelings. If something changes down the road, you know where to find me.

{{senderName}}

When to use it: You have sent two or more follow-ups in January with no response. This is your final message before archiving the lead. For more on structuring this type of message, see the guide on breakup emails.

What to personalize: The topic and a brief nod to your previous outreach. Keep the tone neutral. The goal is to get a yes, a no, or a “not now,” not to guilt anyone into replying.

What to avoid

A few patterns that consistently hurt reply rates during the holiday window:

  • Sending generic “Season’s Greetings” blasts to your entire pipeline. These read as marketing, not sales, and they dilute your sender reputation with low engagement.

  • Offering Black Friday-style discounts in B2B outreach. Urgency-based pricing tactics feel out of place in a consultative sale and train prospects to wait for deals.

  • Scheduling follow-ups that land between December 24 and January 1. Inboxes are either empty or overflowing. Either way, your email gets buried.

  • Using guilt-trip lines like “I haven’t heard back” or “Just bumping this up.” These phrases signal that you are tracking their silence, which creates pressure without value.

If you would not send it to a prospect you respect, do not send it to anyone.

Automate it without sounding automated

The biggest risk with holiday follow-ups is not the copy. It is the timing. A well-written email that lands on December 26 still fails.

Use your prospecting email sequence as the backbone, then layer in holiday-specific adjustments.

Pause cold sequences by December 20. Restart them in the first full working week of January. This keeps your deliverability clean and avoids sending into a void.

lemlist has AI out-of-office detection built in. When lemlist receives an out-of-office auto-reply, it logs the message in the lead’s activity, extracts the return date, and automatically reschedules the next step to that date. It does not treat the out-of-office message as a reply that stops the campaign, so your sequence stays intact and picks up at the right moment.

lemlist also supports conditions on sequence steps, so you can branch based on whether a prospect opened, replied, or did nothing. Combine that with scheduled send windows to keep messages landing during business hours in the prospect’s time zone.

For a deeper look at structuring your sequences with these conditions, the follow-up email template guide walks through the full setup.

Final takeaway

The holiday break does not have to mean lost pipeline. Send your last follow-ups before mid-December, pause cold outreach over the break, and come back in January with short, specific messages that reference your last conversation.

Every template above works as a standalone email or as a step inside a sequence. The fastest way to put them into action is to build your first signal-based sequence in lemlist and set your pause and restart dates before the break starts.

Build cold email campaigns that work

Find verified leads and launch personalized cold email campaigns.

Frequently asked questions

Warm follow-ups to prospects you have already engaged with are fine through mid-December. Cold emails to new prospects should pause entirely from around December 20 through the first days of January. Inboxes are either unmonitored or flooded with catch-up messages, and cold outreach during that window hurts deliverability more than it helps pipeline.

Wait for the return date stated in the auto-reply, then add one to two business days before sending your follow-up. The prospect’s first day back is spent clearing their inbox, not evaluating new conversations. A short email on day two or three, with a one-sentence summary of your original message, gets a better read.

Reference your last exchange in one line, add one sentence of context on why it is still relevant, and close with one clear next step. Do not re-pitch from scratch. The prospect remembers more than you think, and a short email respects their time. For a broader January outreach strategy, the new year prospecting guide covers the full playbook.

Aim for the first full working week, not the first day back. Most people spend January 2 or 3 clearing holiday backlog. By the middle of that first full week, inboxes are manageable and prospects are back in decision-making mode.
Rémi Kokabi

Rémi Kokabi

Co-founder @GTM Club

Share this post